Custom Dipstick Handles

RB Royal provides unique custom solutions to fluid check points. Select from Ring or T-shaped handles of glass filled Nylon 66 in sizes ranging from 3/8-7/16” in openings. Standard in SAE Safety Yellow imprinted with an oil can or simply plain, additional colors and symbols are available on a custom basis. Each handle style is available to accept either flat blade or round wire style gauge sticks, and each is equipped with a black, Viton O-ring.

Custom Dipstick Blades

Available in either Flat Blade or Round Wire Blade matched to the handle of your choice. Standards are: Flat Wire Blade are 0.187 x .035″ and made of pre-phosphated spring steel. Each is pin-stamped per customer design, notched or perforated as part of the gauging with a 90 degree end twist as well as an optional mid-twist to help the blade traverse down the tube properly

Round Wire Blades are 0.062″ in diameter and made of T302 stainless steel spring wire. Each has 0.125 x .028″ stainless steel tube flattened and welded onto the wire end to provide a 1.6″ long gauging area. As per the flat wire, each pin-stamp design is custom to customer requirements.

With the dipsticks of an RB Royal proprietary design it is preferred that they be offered with a custom mated dipstick tube, typically of 3/8″ or 7/8″ diameter at the tube end. Mounting brackets are attached as required, and all tubes are available with painted or plated finishes.

Let RB Royal engineers help you with your custom dipsticks project!